TECNO F3 POP 1 HANG ON LOGO AND SUPPORTED API 3 FIXED WITHOUT FLASHING COMPLETE FIRMWARE FREEE DOWNLOAD

File Details:

Uploaded Date: 2021

File Size: N/a

Download Server: Google Drive

File Status: Free

Supported Tool: Sp Flash TOOL

WHAT LEAD TO SUPPORTED API 3 ON SOME ANDROID DEVICES?

the phone got stuck at supported API 3 after a modification such as removal of FRP with tools that is not completely supporting the model e.g Using Miracle box or performing a Hardreset

  ( only on pop 1)

  

SPECIAL NOTE:

1. Use Sp flash tool to flash
2. After flashing the device with the fix file, Power on the phone and it will boot into recovery mode.
3. Now scroll down and select Wipe data/factory reset.
4. When reset is done, reboot device.
5. The phone should now boot up normal. if the password is shown, Now put in the wrong password until it shows reset

REQUIREMENT
Tecno F3 Pop 1 Pro Hang on Logo & API Fix

DOWNLOAD FIX FILE for Free Wihout Password

👇

⚠WARNING ! If you are going to Flash the above Firmware on your Mobile device, then take a backup of everything Bacaus your personal Data will be Deleted after Flashing the Stock Firmware.

▲NOTE THAT 📣:

THIS  FIRMWARE | fixed for software issue only. FIRMWARE FACTORY SIGNED  Flashing If your phone’s EMMC IC or CPU is damaged, we are not responsible for any errors that occur after our file and flashing. If your phone has hardware issues, your problems will not be resolved. Check your phone’s EMMC to see if it’s OK. Then flash.

🙏 If you do not understand the alert do not hesitate to contact us.