Breaking News

TECNO CAMON I SKY IN2 FIX DISPLAY LIGHT AFTER FLASH | TECNO IN2 OFFICIAL FIRMWARE NEW UPDATE 2020 TESTED 100%


"TECNO CAMON I SKY SPECIFICATIONS"

GENERAL:
Quick ChargingNo
Operating SystemAndroid v8.1 (Oreo)
Sim SlotsDual SIM, GSM+GSM
ModelCamon i Sky
Launch DateApril 17, 2018 (Official)
BrandTecno
Sim SizeSIM1: Nano SIM2: Nano
Network4G: Available (supports Indian bands), 3G: Available, 2G: Available
Fingerprint SensorYes
PERFORMACE:
ChipsetMediaTek MT6739
GraphicsPowerVR GE8100
ProcessorQuad core, 1.3 GHz, Cortex A53
Architecture64 bit
Ram2 GB


WHY YOU WANT TO FALSH TECNO IN2  OR NEED TECNO CAMON I SKY IN2 FIRMWARE FLASH FILE?

THIS OFFICIAL FLASH ARE HELP YOU TO "
>Fix Display light after flash issue 100%
>Fix Network issue
>Removes FRP lock 100%
>Dead Boot After Flash With Wrong File
>Fastboot Mode
>Hang On Logo
>Network issue
>Finally unfortunately App has been stopped
>Also Unwanted monkey / sexy virus......


DOWNLOAD BELOW LINK GIVEN

TECNO  _IN2-H391A-O-180419V125


👊How to flash your TECNO CAMON I SKY IN2 device using flash tool.
Step 1: Download the firmware to your computer.
Step 2: Extract the file on your computer’s drive
Step 3: Download the correct USB driver
Step 4: Extract the file
Step 5: Install the USB Driver.
Step 6: Download Flash Tool
Step 7: Run flash tool.
Step 8: Load scatter files from extracted firmware folder
Step 9: Connect your Device using USB Cable.
Step 10: Now Click the Download / upgrade firmware of flash tool to start flashing.
Step 11: And wait for the process to finish and please do not unplug your device before finishing the process.
Step 12: A green ring display for flash successes will appear at the top
A good battery backup (at least 40% To 50%).



WARNING !
Before Flash Take A Backup Your Personal Data After Doing Flash Firmware Your All Personal Data Will Be Erased. and if you Are Technician We Always Advice to You Make A Backup Full Rom Then Proceed Any Operation.


🙏 If you do not understand the alert do not hesitate to contact us.

No comments